Is It Time to Replace Your Old, Worn Out Rims? Do you miss their brand new shiny appearance? 28 tommer bilfælge your aluminum rims is a fun and creative way to make them look new and different than normal. Well the good news is that with a little elbow grease, there are simple steps and tools to get those rims looking fresh once again. The example above is a great location to begin your road to repainted edges PWC FORGED WHEELS. They have the solution you need to get your wheels looking as good as new
To ensure your rims look top-notch follow these simple steps before you begin painting. You will want to start with few, safe cleaners and some soap and water, give the rims a good scrub down. It is super crucial because dust and dirt can prevent the paint adhering. Rinse them very thoroughly with and let them dry completely. Doing so is best on a day with some sun-ears will dry more quickly.
Step 3: Sand the edges of the rims to remove any rough spots or imperfections using fine-grit sandpaper. 26 tommer fælge helps to ensure the surface is paint ready. I turn to a sealing coat at the end not only because it helps the paint adhere better, but also leaves your rims with that nice shimmery finished feel
And then you will be needing a PWC FORGED WHEELS primer It is a special type of a base coat, so to speak which enables the paint to take better and last longer. Apply PaceSetter primer around the rims to ensure the adhesive will stick, and make sure it dries. You have to be sure to let the primer dry ALL the way before you start painting.
THE GOOD PART, PAINTING. PWC FORGED WHEELS Thin coats of the paint are applied evenly. I would honestly rather do several, thin light layers than one thick one as it helps minimize drips and spots. Allow each coat to dry thoroughly before applying additional coats. Once you have been paint your miniatures, a clear coat should be applied. You see, this brugerdefineret hjul is almost a shield for your fresh new paint. And It helps your rim look good for a long time.
On the side of the Tire, Dismount the PWC FORGED WHEELS Rim First This klassisk 350 mac hjul makes it easier to paint and keeps the tires free from being overspray on Don't forget to wear gloves and a face mask while you sand off paint with the grain. You don't want to breathe any dust, let in alone fumes or harmful debris.
Then simply get your PWC FORGED WHEELS tires mounted, balance them and install them back on your car and enjoy your fresh look. Now just sit back and take a break while you appreciate the hard work with your shiny smedede fælge.
PWCFORGED modtog certificeringer som ISO9001 TUV, ISO9001 osv. PWCFORGED er ejer af flere patenter samt komplet eftersalgsteam.
PWCFORGED er produktionscenter, der dækker arealer på 2000 kvadratmeter med fuld procesproduktionslinje til fremstilling af hjulnav og fælge og en gennemsnitlig årlig produktionskapacitet på 50.000. Virksomheden producerer smedede fælge til tredelte og hjulnav. Det markedsfører disse produkter over hele verden, herunder i USA, Japan, Australien og Det Forenede Kongerige.
Midten forbinder den ydre læbe med den indvendige cylinder. Midten forbinder den ydre læbe inde i cylinderen. Giver større designfrihed, hvilket gjorde det muligt at ændre form, størrelse og farve på alle tre komponenter. Dette er ofte brugt racerkøretøjer, luksusbiler, samt brugerdefinerede ansøgning.
Få specialsmedet hjul fra vores fabrik! Vores professionelle tilpasningserfaring strækker sig over otte år. Vi tilbyder unikke hjulnavsløsninger. Ikke alene kan den støbes i specifikke former for at imødekomme kundernes behov, men den kan også tilpasses med levende og levende farver baseret på præferencer, hvilket sikrer, at din bil er unik. Vi er forpligtet til intelligent fremstilling af hjul fremstillet af materialer af høj kvalitet, der ikke kun opfylder specifikke behov, men også tilbyder markedsledende konkurrenceevne og er foran i branchen. Når du vælger os, vil du have et unikt og iøjnefaldende hjul, der tilføjer din bil nyt liv.